ASTM D6195 Loop Tack Test Method

ASTM D6195

Loop Tack Test Method

Pressure-sensitive adhesives (PSAs) are critical in industries ranging from packaging to medical devices, where their ability to bond instantly under light pressure determines product reliability. ASTM D6195 is a standardized test method used to evaluate the tack properties of pressure-sensitive adhesives. This test determines the initial adhesion strength, also known as loop tack, which is crucial for applications such as labels, tapes, and medical bandages.

Get Quote

What Is the ASTM D6195 Loop Tack Test Method?

ASTM D6195 outlines procedures to quantify the tack force of adhesives, which is the force required to separate a PSA from a substrate shortly after contact. This test simulates real-world scenarios where adhesives must form instant bonds, such as labels, tapes, or medical dressings.

The standard defines two test methods, each suited for different laboratory setups:

1. Test Method A: Using a Skúšačka ťahu

  • Specimen Requirements: A 7-inch (175 mm) adhesive strip is looped with the adhesive facing outward.

  • Postup: The loop contacts a stainless steel panel (25×25 mm) under controlled conditions. A tensile tester measures the force needed to detach the adhesive.

  • Industries Served: Ideal for labs already equipped with tensile testing machines.

2. Test Method B: Using a Loop Tack Tester

  • Specimen Requirements: A shorter 5-inch (125 mm) strip is used, designed specifically for loop tack testers.

  • Postup: The loop is clamped into a dedicated tester, which automates contact and detachment cycles. This method ensures high repeatability and is favored for high-throughput testing.

  • Industries Served: Packaging, medical device manufacturers, and adhesive producers requiring rapid, precise results.

Equipment Required for ASTM D6195 Testing

To perform the slučkový test lepivosti, specific instruments and materials are required:

  • Loop Tack Tester: A specialized instrument for measuring loop tack force.

  • Stainless Steel Test Panels: 25 mm × 150 mm panels, ensuring a consistent test surface.

  • Die Cutter: Used for precise sample preparation.

  • Cleaning Reagents: Acetone, n-heptane, or ethanol-based solutions to clean test surfaces.

  • Masking Tape: Used for securing the specimen loop.

  • PET Film: A support medium for transfer adhesives.

Each component plays a critical role in obtaining accurate a repeatable test results.

Tester priľnavosti slučky 1
LTT-01 Tester priľnavosti slučky

How to Conduct a Loop Tack Test

Príprava vzorky

  1. Cut adhesive samples into 1-inch × 5-inch (25 mm × 125 mm) strips.

  2. Condition the samples at 23°C (73.4°F) and 50% relative humidity for at least 24 hours.

  3. Clean the stainless steel test panels using appropriate reagents.

Postup testu

  1. Set up the loop tack tester: Ensure it is leveled and powered on.

  2. Prepare the adhesive loop: Bend the strip back on itself without creasing, forming a teardrop shape.

  3. Secure the loop with masking tape.

  4. Insert the loop into the tester: Position it correctly for uniform contact.

  5. Initiate the test cycle: The tester presses the loop onto the surface and then pulls it away.

  6. Record the peak force required to separate the adhesive loop from the panel.

  7. Repeat the test at least three times per adhesive sample.

Choosing the Right Loop Tack Tester

For businesses involved in adhesive testing, investing in a high-quality loop tack tester is essential. The Cell Instruments Loop Tack Tester provides:

  • Precision measurement of tack force.

  • User-friendly operation with automated testing.

  • Reliable data for research and quality control.

Contact Us Get Loop Tack Testing Solution

ASTM D6195 is a fundamental standard for evaluating pressure-sensitive adhesives using the loop tack test method. By following proper procedures and using a slučkový tester lepivosti, manufacturers can ensure high-quality adhesive performance. For advanced testing solutions, Cell Instruments’ Loop Tack Tester is an industry-leading choice.

často kladené otázky

ASTM D6195 is a standard test method that measures the loop tack of pressure-sensitive adhesives using a loop tack tester or tensile tester.

The loop tack test measures the initial adhesion strength of an adhesive by determining the force needed to separate it from a surface after controlled contact.

Loop tack indicates an adhesive’s quick-stick capability, essential for labels, medical tapes, and packaging materials.

A loop tack tester applies an adhesive loop onto a surface and then pulls it away, recording the maximum force required to break the bond.

sk_SKSK
en_USEN es_ESES de_DEDE fr_FRFR it_ITIT arAR ko_KRKO jaJA ru_RURU pt_PTPT viVI id_IDID belBE bg_BGBG bs_BABS cs_CZCS da_DKDA elEL etET fiFI he_ILHE hi_INHI hrHR hu_HUHU kkKK lt_LTLT lvLV ml_INML my_MMMY nn_NONN nl_NLNL pl_PLPL ro_RORO sr_RSSR sv_SESV ta_LKTA sl_SISL ukUK uz_UZUZ tr_TRTR sqSQ sk_SKSK
Prejdite na začiatok

ZÍSKAŤ bezplatnú ponuku a spôsob?

Vyplňte formulár nižšie a čoskoro sa vám ozveme.